The innovative design of the S1000 means that you can now benefit from a full specification Tronics labelling system even on a limited budget. The S1000 utilises Tronics’ stepper motor driven label head that has proven its accuracy and reliability in thousands of applications across many industries internationally.
S1000 Labeller
| Specifications | Value |
|---|---|
| Maximum Dispensing Speed: | 30m/min |
| Minimum Dispensing Speed: | 5m/min |
| Label reel core size: | 76mm inside diameter |
| Label reel outside diameter: | 335 maximum |
| Label size vertical: | 15mm – 215mm |
| Label size horizontal: | 20mm – 999mm |
| Label gap size minimum: | 2.5mm |
| Label stop accuracy: | +/- 0.5mm (on dispensing edge) |
| Right and left labelling heads: | Can be left, right, or both |
| Height adjustment side: | 870mm – 1185mm |
| Height adjustment overhead: | 900mm – 1050mm |
| Horizontal adjustment: | 0mm – 150mm |
| Tilt adjustment: | +/- 8 degrees |
TRONICS S1000 APPLICATIONS AND FEATURES & BENEFITS
- Our Tronics S1000 Stand-Alone Pressure Sensitive Labellers were developed for customers who want the durability of our S3 labellers, but are doing more straight-forward simple products.
- The Tronics S1000 is ideal for simple flat panel and promotional spot labeling applications. In addition, if changeover is not frequent and you will be running the same or very similar products all day long, then this may be the best fit for your organisation.
- Although economical, the Tronics S1000 is NOT your typical “Cheap Head-On-A-Stick” pressure sensitive labeller. In fact, this extruded aluminum frame supports Tronics standard S3 label head rated at 30 metres per minute. This means that the S1000 can be upgraded into a S3 at a later date.
Please login to access this page. Login here